Main Article Content
The design of an automobile electromagnetic vibration cavitator created for the cavitation treatment of water-petrol fuel is described. Its use will allow not only saving fuel, but also increasing the completeness of combustion of the water-petrol fuel mixture; in other words, it will contribute to improving the environment. An experimental study of effectiveness of the fuel mixture cavitation treatment was carried out using A95 petrol and distilled water for automobile internal combustion engines. Cavitation treatment of the fuel mixture with a water-to-petrol ratio of 17 to 83% allows for an increase in the savings of expensive petrol by 15‒20% during the operation of engines on flat and downhill roads and in city traffic jams. At the same time, the engine power is reduced by only 6‒7% due to the cavitation treatment.
Article Details
Abikusna, S., Sugiarto, B., Monasari, R. & Yamin, I. (2018). The effect of additive on combustion characteristics and cycle to cycle variations on SI engine fueled by gasoline and bioethanol. Eastern-European Journal of Enterprise Technologies, 6 (6), 27–36. https://doi.org/10.15587/1729-4061.2018.147585 (Crossref)
Aftanaziv, I. S. & Shevchuk, L.I. (2022). Patent of Ukraine for invention No. 125799 Method of cavitation preparation of fuel for internal combustion engines. Bulletin, 23 of 08.06.2022.
Catapano, F., Sementa, P. & Vaglieco, B. M. (2016). Air-fuel mixing and combustion behavior of gasoline-ethanol mixtures in a multi-cylinder optical GDI engine with turbocharging and wall control. Renewable Energy, 96, 319–332. https://doi.org/10.1016/j.renene.2016.04.087 (Crossref)
Chorny, V. I., Lugovsky, O. F. & Prilipko, Y. S. (2001). Device for ultrasonic heating of combustion engines in internal combustion engines. Patent No. UA 42827. Bulletin, 10 of 11.15.2001.
Fedotkin, I. M. & Nemchyn, A. F. (1984). The use of cavitation in technological processes. Kyiv: Higher school. Publishing House at Kyiv. University of Technology.
Fedotkin, I. M. (1979). Intensification of technological processes. Kyiv: Higher school. Main publishing house.
Fedotkin, I. M. (2000). Cavitation, cavitation equipment and technology, their use in industry (Theoretical foundations for the production of excess energy, calculation and design of cavitation heat generators). JSC “GLAZ”, Part 11, 898.
Liu, H., Wang, Z., Long, Y. & Wang, J. (2015). Dual fuel spark ignition (DFSI) burns using various alcohols and gasoline to save fuel. Fuel, 157, 255–260. https://doi.org/10.1016/j.fuel.2015.04.042 (Crossref)
Lugovskoi, A. F. (1997). Application of piezoelectric transducers as a way to improve fuel preparation and supply systems in internal combustion engines. Bulletin of the National Technical University of Ukraine KPI. Mechanical Engineering, 32, 34‒38.
Lugovskoi, A. F. (1998). Preparation of the fuel mixture in an internal combustion engine using ultrasound. Bulletin of the National Technical University of Ukraine KPI. Mechanical Engineering, 32, 209‒213.
Lugovskoi, A. F. (2000). Ultrasonic atomization in fuel-air mixture preparation systems. Engineering in agricultural production, industrial engineering, automation. Collection of scientific works of the Kirovohrad State Technical University, 7, 30‒33.
Lugovskoi, A. F., Chopny, V. I. & Epemenko, A. I. (1998). Preparation of the fuel mixture in the internal combustion engine fueling systems with the help of an ultrasonic disperser with radial-bending oscillations. Progressive engineering and technology of mechanical engineering, application development and coal production. Proceedings of the International Scientific and Technical Conference, 3, 341‒346.
Lugovsky, O. F., Chorny, V. I. & Eremenko, O. I. (1997). Improving the efficiency of the internal combustion engine for ultrasonic combustion processing. Current technologies in the aerospace complex. Materials of the III International Scientific and Practical Conference, 169‒171.
Mysyura, M. I. (2018). Polipshennya ekspluatatsiynykh vlastyvostey dyzelnoho palyva v umovakh nyzkykh temperatur [Improving the operational properties of diesel fuel at low temperatures]. Technical service of the agro-industrial, forestry and transport complexes, 13, 276‒280. https://repo.btu.kharkov.ua//handle/123456789/5142
Phuangwongtrakul, S., Wechsatol, W., Sethaput, T., Suktang, K. & Wongwises, S. (2016). Experimental study of the characteristics of a spark-ignition engine for the optimal mixing ratio of fuels based on ethanol and gasoline. Applied Thermal Engineering, 100, 869–879. https://doi.org/10.1016/j.applthermaleng.2016.02.084 (Crossref)
Shevchuk, L. I. (2013). Low-frequency vibro-resonant cavitators (Monograph 376). Lviv: Publishing House of Lviv Polytechnic.
Shevchuk, L. I. (2014). Cavitation. Physical, chemical, biological and technological aspects (Monograph 176). Lviv: Lviv Polytechnic.
Wang, Z., Liu, H., Long, Y., Wang, J. & He, X. (2015). Comparative study of the combustion of dual-fuel spark mixtures of alcohol-gasoline and gasoline-alcohol (DFSI) for increased load and high fuel efficiency. Еnergy, 82, 395–405. https://doi.org/10.1016/j.energy.2015.01.049 (Crossref)
Downloads
- Ivan Aftanaziv, Inga Svidrak, Orysia Strohan, Yuriy Royko, Vasyl Rys, Dmytro Bielikov, Kernytskyy Ivan, Determining the coordinates of unmanned aerial vehicles , Acta Scientiarum Polonorum. Architectura: Vol. 23 (2024)
- Ivan Kernytskyy, Dmytro Volchenko, Yuriy Royko, Dmytro Zhuravlev, Bohdan Dolishniy, Iryna Bekish, Vasyl Rys, Ruslan Humeniuk, Yaroslav Sholudko, Oksana Berezovetska, Olga Szlachetka, Complex heat exchange in brake friction pairs , Acta Scientiarum Polonorum. Architectura: Vol. 23 (2024)
- Ivan Aftanaziv , Orysia Strohan, Inga Svidrak, Nazarii Kernytskyy, Yuriy Royko, Oksana Berezovetska, Dmytro Bielikov, Marek Chalecki, Increasing the durability of large-calibre cannon barrels through strengthening them by surface plastic deformation , Acta Scientiarum Polonorum. Architectura: Vol. 23 (2024)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.